Ductile Iron Casting Machinery Parts

Sand casting is relatively cheap and sufficiently refractory even for steel foundry use. In addition to the sand, a suitable bonding agent (usually clay) is mixed or occurs with the sand. The mixture is moistened, typically with water, but sometimes with other substances, to develop strength and plasticity of the clay and to make the aggregate suitable for molding. The sand is typically contained in a system of frames or mold boxes known as a flask. The mold cavities and gate system are created by compacting the sand around models, or patterns, or carved directly into the sand. Casting Engineering Machinery Components Ductile Iron Engineering Machinery Parts Ductile Iron Casting Machinery Parts Spare parts of engineering machinery Basic process Also we have the enough experience of producing Austempered Ductile Iron Casting, austenitic nodular iron. There are diverse ways to describe the Ductile Iron Castings, such as – Ductile Iron, Ductile Cast Iron, SG, SG Iron, Spheroidal Graphite and Spheroidal Graphite Cast Iron etc., all of them can be used and interchangeable. There are six steps in this process: 1.Place a pattern in sand to create a mold. 2.Incorporate the pattern and sand in a gating system. 3.Remove the pattern. 4.Fill the mold cavity with molten metal. 5.Allow the metal to cool. 6.Break away the sand mold and remove the casting.